Epson Stylus Pro 7600 Photographic Dye Ink Unpacking And Setup Manual - Page 11

Browse online or download pdf Unpacking And Setup Manual for Software Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 24 pages. Epson stylus pro 7600: brochure
Also for Epson Stylus Pro 7600 Photographic Dye Ink: Brochure & Specs (24 pages), Information Manual (16 pages), Specifications (4 pages), Quick Installation Manual (34 pages), Product Information (15 pages), Quick Reference Manual (11 pages), Warranty (8 pages), Brochure & Specs (8 pages), Brochure & Specs (16 pages), Product Reference Manual (28 pages), Manual Update (4 pages)

Print Page

Place the front rubber legs of the printer

just at the end of the desk.

Leave enough room (over 600 mm) in

front of the desk.

Prevent your printouts from getting dirty

or crinkled.

Use a grounded power outlet. Do not use a

damaged or frayed power cord. Avoid using

an outlet that is shared with other appliances.

Use only an outlet that meets the power

requirements of this printer.

Operate the printer under the following

conditions:

Temperature:

10 to 35 °C

Humidity:

20 to 80% without condensation

Avoid locations that are subject to direct

sunlight, excessive heat, moisture, or dust.

Do not block the ventilation openings.

Avoid locations near potential sources of

interference such as loud speakers or cordless

phones.

Avoid locations near TVs, radios, air

conditioners, or humidifiers.

Avoid locations that are subject to shocks or

vibrations.

Keep the printer away from combustible

substances.

Keep the printer away from dusty areas.

Unpacking the Printer

Caution:

The printer unit is heavy and unwieldy.

Have two people unpack the printer.

1. Open the box containing the printer and

remove the cardboard panel, the accessory

box (A), the roll paper spindle with roll paper,

and the polystyrene foam (B) around the

printer unit.

2. Remove the fixers from the sides of the box.

Lift the box up and away from the printer,

then fold it and set it aside.

3. Remove the cardboard panels.