Epson Stylus Pro 7600 Photographic Dye Ink Product Information - Page 14

Browse online or download pdf Product Information for Software Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 15 pages. Epson stylus pro 7600: brochure
Also for Epson Stylus Pro 7600 Photographic Dye Ink: Brochure & Specs (24 pages), Unpacking And Setup Manual (24 pages), Information Manual (16 pages), Specifications (4 pages), Quick Installation Manual (34 pages), Quick Reference Manual (11 pages), Warranty (8 pages), Brochure & Specs (8 pages), Brochure & Specs (16 pages), Product Reference Manual (28 pages), Manual Update (4 pages)

Print Page

EPSON Stylus Pro 7600 and 9600

8. Carefully remove the cutter blade. Be careful not to lose the

spring.

CAUTION: The blade is sharp. Be careful when removing it.

9. Insert the new cutter as shown.

10. Push down on the side pin while turning the latch to

the left.

11. Close the front cover. The carriage returns to the

home position and the printer returns to its previous

status.

15 - EPSON Stylus Pro 7600 and 9600

Replacing the Maintenance Tank

When the maintenance tank is almost full, the Maintenance

Tank light on the control panel flashes. When the tank is

completely full, the printer stops working and the

light stays on. You see the message

Maintenance Tank

CHANGE MAINTENANCE TANK on the control panel.

You can check how much space remains in the maintenance

tank by viewing its indicator on the control panel, shown

below.

Maintenance

tank indicator

(showing a

new tank)

Follow these steps to replace the tank:

1. Make sure the printer is not printing or performing any

other operations (READY or PAPER OUT should appear

on the control panel).

2. Pull out the maintenance tank from the side of the printer.

CAUTION: Be careful not to spill ink from the tank when removing

it. Hold it upright at all times.

3. Insert the new tank.