Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Unpacking & Setup Instructions - Page 14

Browse online or download pdf Unpacking & Setup Instructions for Software Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 pages. Warranty statement
Also for Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst: Brochure (1 pages), Getting Started (13 pages), Brochure & Specs (8 pages), Network Manual (46 pages), Manual (12 pages), Limited Warranty (12 pages)

Print Page
Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst Unpacking & Setup Instructions

Unpacking the Printer

c
Caution:
The printer unit is heavy and unwieldy.
Have two people unpack the printer.
1. Open the box containing the printer and
remove the roll paper spindle with roll paper,
polystyrene foam, and cardboard cushions
from around the printer.
2. Remove the fixers from the sides of the box.
3. Lift the box up and away from the printer.
Remove all the items from the hollow (A and
B) on the rear side of the printer.
Note:
The ink cartridges included with your printer are
primarily for initial setup.
12
4. Remove the polystyrene foam stoppers from
the sides of the printer.
5. Remove the protective materials:
❏ from the front cover (tape).
❏ from the ink compartment cover (tape).
❏ from the maintenance tank (tape).
❏ from the side of the print head
compartment (screw and metal plate
inside the front cover).
Note:
Do not re-install the screw. Store it separately to
avoid losing it.
c
Caution:
Be careful not to touch the parts highlighted
below; otherwise, the printer may be
damaged.