Epson StylusRIP Professional (Stylus Photo 2200 Product Support Bulletin - Page 9

Browse online or download pdf Product Support Bulletin for Software Epson StylusRIP Professional (Stylus Photo 2200. Epson StylusRIP Professional (Stylus Photo 2200 10 pages. Product support bulletin(s)
Also for Epson StylusRIP Professional (Stylus Photo 2200: Start Here Manual (6 pages), Specifications (2 pages), Product Support Bulletin (6 pages), Product Support Bulletin (1 pages), Product Support Bulletin (4 pages)

Epson StylusRIP Professional (Stylus Photo 2200 Product Support Bulletin
During the update process, you will see a message on the screen at the TFTP prompt that a
number of bytes were sent. This means the update is complete.
Note: If a timeout error occurs do the following:
Check your TCP/IP settings
Cycle the power of the print server
Run WP-Admin, click CLEAR then click START
Check the TCP/IP settings in the Configuration page of the print server, save the settings then
Quit.
Rerun step 4.
5. Next, go to the print server and perform a reset, then launch WP-Admin again to setup the
print server.
6. At WP-Admin in the search screen, click on CLEAR first, then click on START for the print
server to reappear.
Page 5 of 6