Philips AZ102B User Manual - Page 11
Browse online or download pdf User Manual for Stereo System Philips AZ102B. Philips AZ102B 14 pages. Cd soundmachine
Also for Philips AZ102B: User Manual (15 pages), User Manual (2 pages), User Manual (2 pages), Brochure (2 pages), User Manual (1 pages), Service Manual (11 pages)
Print Page
AZ102_05_ENG_CCR
2010.3.30
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Problem
– Possible cause
• Remedy
No sound /power
– Volume not adjusted
• Adjust the VOLUME
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– CD contains non-audio files
• Press ∞ , § once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds
--, Er or 01
indication
– No CD inserted
• Insert a CD
– CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
– Laser lens steamed up
• Wait until lens has cleared
– CD-R/CD-RW is blank or not finalized
• Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
15:14
Page 11
Note:
Make sure the CD is not encoded with copy-
right protection technologies, as some do not
conform to the Compact Disc standard.
The CD skips tracks
– CD damaged or dirty
• Replace or clean CD
–
Program/shuffle
is active
• Quit
program/shuffle
Note: A CD badly scratch or dirty may result in
improper
operation.
mode