Philips AZ1834 User Manual - Page 12
Browse online or download pdf User Manual for Stereo System Philips AZ1834. Philips AZ1834 13 pages. Mp3-cd soundmachine
Also for Philips AZ1834: Specifications (3 pages), Quick Start Manual (1 pages), User Manual (19 pages), Quick Start Manual (1 pages), User Manual (15 pages), Quick Start Manual (1 pages), User Manual (17 pages)
Print Page
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
No sound/ power
– Volume not adjusted
• Adjust the VOLUME
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
• Insert (fresh) batteries correctly
– Disc contains non-audio files
• Insert a suitable disc or press ∞ or § once or
more skip to an audio track, instead of the data
files.
Display does not function properly/No
reaction to operation of any of the
controls
– Electrostatic discharge
• Switch off and unplug the set. Reconnect after a
few seconds.
no indication
– It is set in the USB mode.
• Press CD to select CD mode.
– No disc inserted
• Insert a suitable disc
– Disc badly scratched or dirty
• Replace/clean CD (See Maintenance)
– CD-R(W) is blank or the disc is not finalized.
• Use a finalized CD-R(W)
– Laser lens steam up
• Wait until lens has cleared.
Note:
Make sure the CD is not encoded with
Copyright protection technologies, as some
do not conform to the Compact
Disc standard.
The disc skips tracks
– Disc damaged or dirty
• Replace or clean disc
– Shuffle or program is active
• Quit shuffle/program
Do not open the set as there is a risk of electric shock. Under no cir-
cumstances should you try to repair the set yourself, as this will inval-
idate the guarantee.
Sound skips during MP3 playback
– MP3 file made at compression level exceeding
320kbps
• Use a lower compression level to record CD
tracks into MP3 format
– Disc damaged or dirty
• Replace or clean disc.
Note:
DRM-protected WMA disc is not supported.
The USB device doesn't play on my
AZ1834
– It is not set in the USB mode.
• Press USB to select USB mode.
– The device is not securely connected to AZ1834's
USB port.
• Re-connect the device, and make sure that the
device is powered on.
– The device is not supported by AZ1834, or the audio
file format stored on the device is not supported by
AZ1834.
• Use a compatible device/ playable audio file
format.