Toshiba SD 890 - Hi-Def Multi Region 1080p Up-Converting HDMI All Code Zone Free DVD Player Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for DVD Player Toshiba SD 890 - Hi-Def Multi Region 1080p Up-Converting HDMI All Code Zone Free DVD Player. Toshiba SD 890 - Hi-Def Multi Region 1080p Up-Converting HDMI All Code Zone Free DVD Player 40 pages. Dvd player

Print Page

Connections

Content of the output for each output jack is shown in the following table

and differ depending on the On-Screen Display Setting:

On-Screen Display Setting

"Video Output" HDMI Output

Setting

Setting *

Component

Invalid

(Interlaced)

P-Scan

Invalid

(Progressive)

576p

HDMI

720p

1080i

1080p

* Settings for HDMI output format are performed using the HDMI button

on the remote control or the HDMI SELECT button on the front panel.

Note

If Auto is selected, it follows preference HDMI aspect ratio of TV.

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.

• For connection to your TV, see "Connecting to a TV" .

• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal flow

Notes

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This

input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack

of the DVD player.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the "DIGITAL (COAXIAL)" input of a Receiver or Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall

outlet before making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening

level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD player's power cord. If you leave the amplifier power on, the

speakers may be damaged.

Content of output for each output jack

HDMI

Video

Component

Output

Composite

576p

Composite

720p

1080i

1080p

Output

576i

576p

Warning

• When you are connecting (via the COAXIAL DIGITAL

AUDIO OUT jack) an AV decoder that does not have Dolby

Digital, Digital Theater Systems (DTS) or MPEG2 decoding

function, be sure to set "Digital Output" to "PCM" from the

on-screen displays. Otherwise, high volume sound may

damage your hearing as well as the speakers.

• When playing DTS-encoded discs (DVDs and audio CDs),

excessive noise may be output from the analog audio output

jacks. To avoid possible damage to the audio system, you

should take proper precautions when the analog audio output

jacks of the DVD player are connected to an amplification

system. To enjoy DTS Digital Surround™ playback, an

external 5.1 channel DTS Digital Surround™ decoder

system must be connected to the COAXIAL DIGITAL

AUDIO OUT jack of the DVD player.