Philips BTB3370/12 User Manual - Page 11

Browse online or download pdf User Manual for Stereo System Philips BTB3370/12. Philips BTB3370/12 26 pages.

Print Page
Philips BTB3370/12 User Manual

Prepare the remote control

Caution
•
Risk of product damage! When the remote control is
not to be used for long periods, remove the battery.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.

Set clock

1
In power-on mode, press and hold
CLOCK on the remote control for 3
seconds.
» The [24H] or [12H] hour format is
displayed.
2
to select the [24H] or
Press
/
[12H] hour format.
3
press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set the hour and
minute.
Note
•
If no button is pressed within 90 seconds, the unit exits
clock setting mode automatically.
Tip
•
You can press CLOCK to view clock information in
power-on mode.

Turn on

•
Press .
» The unit switches to the last selected
source.

Switch to standby mode

•
Press
again to switch the unit to standby
mode.
» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
•
Press and hold
» The display panel is dimmed.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
•
Press and hold
for more than 3 seconds.
for more than 3 seconds.
EN
9