Philips BTD5210/12 User Manual - Page 20
Browse online or download pdf User Manual for Stereo System Philips BTD5210/12. Philips BTD5210/12 30 pages.
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC, FM, or USB as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIME/
SLEEP for more than two seconds.
» "The hour digits are displayed and
begin to blink.
2
Press
/
(or+/-/) repeatedly to set the
hour, and then press TIME/SLEEP .
» The minute digits are displayed and
begin to blink.
3
Repeat step 2 to select the source, and
adjust volume.
Note
•
If no button is pressed in 90 seconds, the unit exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
In standby mode, press TIME/SLEEP
•
repeatedly to activate or deactivate the
alarm.
» If the timer is activated,
Tip
•
If the disc/USB source is selected, but no disc is placed
or no USB connected, the unit switches to the tuner
source automatically.
EN
18
is displayed.
Set the sleep timer
•
To set the sleep timer, when the unit is
switched on, press TIME/SLEEP repeatedly
to select a set period of time (in minutes).
» When the sleep timer is activated,
is displayed.
To deactivate sleep timer:
When the unit is switched on, press TIME/
•
SLEEP repeatedly until [SLP OFF] (sleep
off) is displayed.
» When the sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an 3.5mm audio cable (not supplied).
1
Make sure that the external audio device is
connected to this unit.
2
Press AUX to select the AUX IN source.
3
Start to play the external device (see the
user manual of the external device).