MSI Optix G273QF3CA8 Manual - Page 23

Browse online or download pdf Manual for Monitor MSI Optix G273QF3CA8. MSI Optix G273QF3CA8 27 pages.

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.
∙ All cautions and warnings on the device or user's manual should be noted.
∙ Refer servicing to qualified personnel only.
∙ Keep the User's Guide that comes with the package for future reference.
∙ To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
∙ Lay this device on a reliable flat surface before setting it up.
∙ Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
Do not disable the protective earth pin from the plug. The device must be connected
to an earthed mains socket-outlet.
∙ Always disconnect the power cord or switch the wall socket off if the device would be
left unused for a certain time to achieve zero energy consumption.
∙ The ventilator on the device is used for air convection and to prevent the device from
overheating. Do not cover the ventilator.
∙ Do not leave the device in an unconditioned environment with a storage temperature
above 60℃ or below -20℃, which may damage the device.
∙ NOTE: The maximum operating temperature is around 40℃.
∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙ Always keep strong magnetic or electrical objects away from the device.
∙ If any of the following situations arises, get the device checked by service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated into the device.
• The device has been exposed to moisture.
• The device does not work well or you can not get it work according to user's
manual.
• The device has dropped and damaged.
• The device has obvious sign of breakage.
∙ To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed
object with a anti-tip fastener that helps to properly support the monitor and keep it
safe in place.
Important
Please confirm the power distribution system in the installation site shall provide the
circuit breaker rated 120/240V, 20A (maximum).
23
Safety Instructions