Switch to ECO standby mode:
Press and hold
for more than three seconds.
» The backlight on the display panel turns off.
» The red Eco Power indicator turns on.
Switch between standby mode and ECO
standby mode:
Press and hold
for more than three seconds.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Set clock
1
In standby mode, press and hold CLOCK/
DISPLAY for three seconds to activate the
clock setting mode.
» The hour digits are displayed and begin
to blink.
2
Press
/
to set hour, and then press
CLOCK/DISPLAY again.
» The minute digits are displayed and
begin to blink.
3
Repeat step 2 to set minute.
Adjust brightness of display
panel
In standby mode, press DIM repeatedly to
select different brightness levels.
Find the correct viewing
channel
1
Press DISC to switch to disc mode.
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
EN
12
• Go to the lowest channel on your TV,
and then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly on
the remote control of your TV.
Tip
•
The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press SYSTEM/MENU.
2
Select [Video Setup].
3
Select [TV System], and then
4
Select a setting and then press OK.
• [NTSC]: For TV with NTSC color
system.
• [PAL]: For TV with PAL color system.
• [Multi]: For TV that is compatible with
both PAL and NTSC.
5
To return to the previous menu, press
RETURN/TITLE.
6
To exit the menu, press SYSTEM/MENU.
Change system menu
language
1
Press SYSTEM/MENU.
2
Select [General Setup].
3
Select [OSD Language], and then press
.
4
Select a setting and then press OK.
5
To exit the menu, press SYSTEM/MENU.
.
Print Page