Philips DCD3020 User Manual - Page 12

Browse online or download pdf User Manual for Stereo System Philips DCD3020. Philips DCD3020 30 pages. Dvd micro theater
Also for Philips DCD3020: Quick Start Manual (2 pages), User Manual (32 pages), User Manual (33 pages), User Manual (32 pages), User Manual (41 pages), User Manual (32 pages), User Manual (2 pages), User Manual (32 pages)

Print Page
Philips DCD3020 User Manual
a
b
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.

Turn on

Press .
» The unit switches to the last selected
source.
Switch to standby mode or Eco
power standby mode
Press
again to switch the unit to standby
mode.
» The clock (if set) appears on the display
panel.
Switch to ECO standby mode:
Press and hold
for more than three seconds.
c
» The backlight on the display panel turns off.
» The red Eco Power indicator turns on.
Switch between standby mode and ECO
standby mode:
Press and hold
for more than three seconds.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.

Set clock

1
In the standby mode, press and hold
CLOCK/DISPLAY for over 3 seconds to
activate the clock setting mode.
» The hour digits are displayed and begin
to blink.
2
Press
/
to set the hour, and then press
CLOCK/DISPLAY again.
» The minute digits are displayed and
begin to blink.
3
Press
/
to set the minute, and then
press CLOCK/DISPLAY to confirm the
clock setting.
Adjust brightness of display
panel
In standby mode, press DIM repeatedly to
select different brightness levels.
Find the correct viewing
channel
1
Press DISC to switch to disc mode.
EN
11