Toshiba 3LCD Quick Reference Card

Browse online or download pdf Quick Reference Card for Projector Toshiba 3LCD. Toshiba 3LCD 2 pages. 3lcd data projector

Print Page
OPERATIONS
3LCD DATA PROJECTOR
QUICK REFERENCE CARD
Projecting a Picture
• Connect external equipment
1
such as a computer or
video tape player.
• Connect the power cord to
the projector.
2
Press ON/STANDBY.
ON/STANDBY
Both the ON and LAMP indications light up
in green.
3
Turn on the connected equipment
and put it in playback mode.
Projecting Images with the Document Imaging Camera
1
1) Raise up the arm.
2) Stretch the arm.
3) Turn the arm.
After using, return the arm to the original position in the
reverse order.
Turning Off the Power After Use
1
Put the connected equipment
in the stop mode.
2
Press ON/STANDBY.
ON/STANDBY
An instruction message appears.
For more informations about usage and operations, see the owner's manual.
"Camera" function is equipped only with the model which has a document imaging camera model.
4) Open the camera head.
5) Turn the camera head.
6) Pull up the light.
7) Turn the light.
Press INPUT to select the
4
INPUT
input source.
Video:
RGB:
CAMERA: Camera input picture
Adjust the picture size and
focus.
5
Zoom ring: Adjust the picture size.
Focus ring: Focus the picture.
2
Press ARM LIGHT.
ARM LIGHT
The light turns on.
3
Place a document onto or
around the projector, and turn
the camera head to direction
of the document.
4
Press CAMERA.
CAMERA
The appeared image is a projected one
through the camera.
5
Move the camera head to
adjust the size of the picture,
and focus on the picture by
turning the focusing ring on
the camera head.
3
Press ON/STANDBY again.
ON/STANDBY
(Power turns off and then the lamp goes off.)
4
After confirming the exhaust fan
stops, unplug the power cord.
VIDEO input picture
RGB input picture
Up : to reduce.
Focusing ring
N : Near
F : Far
Down : To enlarge.