Toshiba TDP-EW25 Owner's Manual - Page 29

Browse online or download pdf Owner's Manual for Projector Toshiba TDP-EW25. Toshiba TDP-EW25 50 pages. Extreme short throw projector
Also for Toshiba TDP-EW25: Specifications (2 pages), Installation Manual (6 pages)

Print Page
Toshiba TDP-EW25 Owner's Manual
Using the menus 2 (Continued)
Note
If you select [Network Projector] in the Setting display (2) menu, the same items
•
in [Network Utility] will be displayed except for the following items.
[Easy Connect (USB memory)] feature is not available.
1
In the item [Application], [Password] and [Disconnect] are available as
follows.
Category
Item
Password
Application
Set password
Disconnect
Disconnect while transferring an image using Network Projector.
[Yes
See "Setting the Network Projector/Network Utility"
and settings for Network Projector.

Computer settings

Refer to instruction manuals of your computer or wireless LAN adapter to perform the
following settings.
•
Select Ad hoc (for some wireless LAN adapters, this is Peer-to-Peer Group).
•
Set SSID (for some types of wireless LAN adapter, use Network name instead) as
the same as projector's SSID (at factory shipment, this is set to TDPJ).
•
If Encryption, Network authentication, Key index and Network key are set on
the projector, set to the same values.
Note
•
The Easy Connect utility
allows users to easily connect the projector to
p.70
a computer over wireless networks, without making wireless LAN settings. For
Easy Connect support, the computer requires a wireless LAN environment that is
NDIS5.1 or higher driver compliant.
Refer to the user's manual supplied with the wireless LAN adapter or the wireless
LAN embedded computer for more information.
Description
On
No]
[Enter:
]
to conduct adjustments
p.51
56

The control setting menu

This menu sets Projector name, Email function and PJLink function, etc. Select Control
setting in step in "Projector settings"
Item
Projector
Specify a desired character string (0 to 16 characters).
name
[
or
character.]
Confirm: [OK
Email
[
Off
Status notification: On
SMTP server: Enter a character string using numeric keys of the remote
control.
Port number: Enter a character string using numeric keys of the remote
control.
Destination address: Enter a character string using numeric keys of the
remote control.
Confirm:
PJLink
[
PJLink authentication: On
Password: Enter a character string (1 to characters) using numeric keys of
Confirm: [OK
Wireless
[
or
network
Confirm: [OK
 Detailed description
[Projector name]
•
This can be used to identify projectors when communicating with multiple projectors, or
if there is a possibility that another person who is out of communication range will be
using the same projector. It is recommended this is set to prevent wrong transmission.
[Email]
•
<Status notification>: Sends alarm information to the specified E-mail address when
an error such as lamp blowout occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: [email protected])
[PJLink]
•
<PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink-compliant Software Application. (Set [On]
or [Off].)
<Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
p.50
. The following content will be displayed.
Description
: Enter setting.]
[
: Select item.]
[
[
to
: Set a character.]
Cancel]
[Enter:
]
: E-mail setting]
[
: Select item]
Off
[OK
Cancel]
: PJLink setting]
[
: Select item]
Off
the remote control.
Cancel]
: Enter setting.]
[
: Select item.]
[Enabled
Cancel]
[Enter:
]
57
: Move left or right one
Disabled]