CROWNFUL IM2102-UL Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Ice Maker CROWNFUL IM2102-UL. CROWNFUL IM2102-UL 13 pages.

Print Page

TROUBLESHOOTING

Problem

"ADD WATER"

indicator turns on

"ICE FULL" indicator

lights up

The ice collects or

melts together.

The ice-making cycle

seems normal but no

ice is produced.

Possible causes

1.Low water level or lack of

water

2.The water screen at the bottom

of water reservoir is blocked.

3.Pump malfunction.

1.Ice basket is full and the

infrared light is blocked by the

ice.

2. Infrared light-emitting diode

& light-receiving diode do not

work

Prolonged ice making process,

insufficient cooling or something

is blocked inside.

The water in the water reservoir

is of too low temperature.

The ambient temperature or

water temperature is too high.

1.Stop making ice, refill

water

"ON/OFF" key to restart the

ice-making cycle.

2.Clean the unit.

3.Send it to the authorized

department for repair.

1. Remove the ice from ice

basket.

2a. Wipe up any foreign

objects

light-emitting

light-receiving diode and

restart the ice maker.

2b. Call Customer Service if

the infrared light-emitting

diode

diode will still not work

after wiping any possible

foreign

restarting the cycle.

Stop making ice, check the

basket for any blockage or

any large clumps of ice

(Remove it) and restart the

ice-making cycle after the

ice melts.

Fill the water reservoir with

water ranges between 8℃

and 25℃.

Start the ice-making cycle at

an environment with an

ambient temperature less

Solution

and

then

press

the

infrared

diode

light-receiving

objects

and