Toshiba XC2000U - XGA LCD Projector Owner's Manual - Page 10
Browse online or download pdf Owner's Manual for Projector Toshiba XC2000U - XGA LCD Projector. Toshiba XC2000U - XGA LCD Projector 31 pages. 3lcd data projector (with document camera)
Print Page
Names of the terminals on the rear panel
(1)
(2)
(3)
(4)
(5)
Name
: Main Function
(1) CONTROL terminal
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
(2) AUDIO (L/R) terminal
: Input audio signals from video equipment.
(3) VIDEO terminal
: Input video signals from video equipment.
(4) S-VIDEO terminal
: Input S video signals from video equipment.
(5) AUDIO IN terminal
: Input audio signals from a computer, or from video
equipment with a component video signal output
terminal.
(6) COMPUTER 1 IN terminal
: Input RGB signal from a computer or other source or a
component video signal (Y/P
equipment.
(7) AUDIO OUT terminal
: Outputs audio signals.
(8) COMPUTER 2 IN terminal
: Inputs RGB signal from a computer or other source or
(Also used for MONITOR OUT terminal)
a component video signal (Y/P
equipment. It can also be used as MONITOR OUT
terminal by the switch of (9).
(9) Switch
: Switches between COMPUTER 2 IN and MONITOR
OUT.
COMPUTER 2 IN
(Y/P
/MONITOR OUT
(6)
(8)
(9)
(7)
/P
) from video
B
R
/P
) rom video
B
R
/P
2)
B
R
18
Names of each part on the document camara
Name
Camera
p.59
(1) LED illumination
(2) Focus ring
(3) Camera lens
(4) Camera arm
(5) Infrared remote sensor
Control Panel
(6) 50/60 Hz switch
(7) CAMERA button
(8) CAMERA GAIN button
(9) LOCK (W.BALANCE) indicator : Lights when the white balance has been locked.
(10) W.BALANCE button
(11) LED LIGHT button
(models with a document camera)
(1) (2)
(3)
(4)
(6)
(7)
(8)
(5)
: Main Function
: The illumination LED for referring documents.
: Adjusts the focus.
p.47
: The camera lens of the document camera.
: Adjusts the camera angle.
p.45
: Senses commands from the remote control.
: Matches the shutter speed of the camera to your power
system frequency.
p.47
: Switches between the camera input and the previous
input.
p.46
: Adjusts the camera gain.
p.47
: Switches between auto and locking of white balance.
p.48
: Switches on/off the LED illumination.
19
(9)
(10)
(11)
(8)
p.46
p.48
p.46