Epson WorkForce 600 Series Function Manual - Page 3

Browse online or download pdf Function Manual for Software Epson WorkForce 600 Series. Epson WorkForce 600 Series 28 pages. Using the control panel for wireless network installation
Also for Epson WorkForce 600 Series: Network Installation Manual (41 pages), User Manual (34 pages), User Manual (38 pages), Cartridges Replacement (2 pages), Important Setup Information (2 pages), Specifications (2 pages), Start Here Manual (9 pages), Product Support Bulletin (5 pages)

Print Page

Connecting to Your Wireless Network

To add the printer to your wireless network, you need to know the name (SSID)

of your wireless network. If it has security enabled, you also need to know the

security mode and WEP key or WPA passphrase. Enter your network and security

information in the space provided below:

Network name (SSID): ____________________________________________

Security mode (select one):

❑

None

❑

WEP-64, ASCII

❑

WEP-64, Hexadecimal

❑

WEP-128, ASCII

❑

WEP-128, Hexadecimal

❑

WPA-PSK (TKIP)

❑

WPA-PSK (AES)

WEP key or WPA passphrase: _______________________________________

Note:

The printer supports the following wireless security modes: WEP-64, WEP-128, and

WPA-PSK.

If your WEP key is 5 or 13 characters, it's ASCII. If it's 10 or 26 characters, it's

hexadecimal.

If your WPA passphrase contains upper- or lowercase letters, be sure to note them

correctly.

If your wireless network uses WPA as the security mode, you will also need to know

whether it's using TKIP or AES as the encryption algorithm.

If you don't know your wireless network name (SSID) or security settings, contact the

person who set up your wireless network.

Connecting to Your Wireless Network