Croydex FLEXI FIX AJ402041 Instructions - Page 2

Browse online or download pdf Instructions for Bathroom Fixtures Croydex FLEXI FIX AJ402041. Croydex FLEXI FIX AJ402041 4 pages.

Print Page
SECTION 1 - INTRODUCTION
INTRODUCTION
Thank you for purchasing this Croydex product. Please follow all
installation and product care instructions to ensure that your
product is installed safely and retains it's high quality finish.
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
SAFETY & PRODUCT CARE
ALWAYS
1.
take care when using power tools, particularly if
there is any water in the working area.
2.
When drilling into a tiled surface
drill.
ALWAYS
3.
use a drill bit that is suitable for the surface that is
being drilled.
4.
Always use a residual current circuit breaker (RCCB/GFCI).
5.
The wall plugs supplied are for use on solid walls only. For
cavity walls or plasterboard
that are suitable for the type of wall construction.
ALWAYS
6.
wear eye protection when using power tools.
ALWAYS
7.
check for pipes and cables before drilling into
walls.
ALWAYS
8.
use a ceramic drill bit when drilling into tiled
surfaces.
9.
The maximum safe working load for the shelf is 5kg
distributed evenly.
DO NOT
10.
position glass products directly above a heat
source.
DO NOT
11.
use abrasive or chemical cleaners as these may
damage the product.
12.
To retain the best quality finish, clean product regularly
with a soft damp cloth.
13.
Redecoration may be required on some painted surfaces
after removal.
DO NOT
use a hammer
ALWAYS
use specialist fixings
x1
INTRODUCTION
The adhesive is suitable for use on most flat finished surfaces, such as gloss
paint, tiles, polished stone, laminates and textured surfaces. DO NOT USE
ON DECORATIVE WALL PAPER FINISHES. The adhesive is NOT suitable for
unfinished materials such as brick, block-work, wood, emulsion paint, loose,
flaky surfaces or surfaces contaminated with grease, wax or dust. In some
circumstances extreme environmental conditions or physical damage to the
adhesive tube may initiate the curing process. In the unlikely event that your
adhesive has hardened or it's tube is damaged, replacement adhesive can be
obtained from our customer services department.
SECTION 2 - PRE-INSTALLATION
PRODUCT FITTING
IMPORTANT!
Before attempting to install this product, ensure that it fits
and will function in the desired location.
TOOLS REQUIRED
2
MAX
11Ib
(5kg)
/
"
15
64
(6mm)
WMA 109 R09