Croydex AP5011 Series Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Bathroom Aid Croydex AP5011 Series. Croydex AP5011 Series 2 pages.

Print Page

Fitting Instruction

Fig.1

1. Separate the wall bracket covers from the wall brackets by twisting the covers in an

anti-clockwise direction.

2. Place the grab bar in position on the wall and using the hole centres of each wall

bracket as a template, mark the screw fixing positions on the wall surface. If fitting

the product in a vertical or horizontal orientation it is important to ensure the grab

bar is level. (See Fig.2)

3. Drill the holes in the marked positions using a masonry drill. (See Fig.2) If the

product is to be fitted onto a ceramic tiled wall, a ceramic drill bit should be used.

4. Insert wall plugs flush to the surface of the wall. If fitting to a tiled surface, the wall

plugs should be inserted below the surface of the tile to avoid cracking.

5. Insert the screws through the holes of the wall brackets and screw to the wall. (See

Fig 2)

6. Slide the wall bracket covers back onto the wall brackets and twist in a clockwise

direction to lock the covers in position. (See Fig.1)

Additional Information

•

This product must only be fitted to solid brick, concrete block walls or

similarly strong materials offering appropriate support for the maximum safe

working load.

•

Maximum safe working load for the Grab Bar is 100kg.

Product Care Advice

•

To retain the best quality finish, clean product regularly with a soft damp cloth.

•

Do not use abrasive or chemical cleaners, as these will damage the product.

Please retain this leaflet for future reference.

Croydex, Central Way, Andover, Hants, SP10 5AW, UK

Website: www.croydex.com E-mail: [email protected].

Tel: +44 (0) 1264 365881. Fax: +44 (0) 1264 356437

Fixings are shown for

reference only and are not

supplied with the product.

Fig.2

S&H 022 R02