3Com 7250 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Wireless Access Point 3Com 7250. 3Com 7250 9 pages. Converting to managed access point operation
Also for 3Com 7250: Datasheet (4 pages), Conversion Manual (10 pages)

Print Page

Configuration Notes

For a new access point installation, the default WLAN Service Area (ESSID) is 3Com and no

security is set. Unless it detects a DHCP server on the network, the access point uses Auto IP

to assign an IP address of the form 169.254.2.1.

Use the 3Com Wireless Infrastructure Device Manager to locate 3Com Wireless LAN devices

and launch their configurations. When installing the device manager, make sure the computer

is connected to the same network as the device to be configured. The default login is "admin"

and there is no password. After installing and launching the device manager, select the device

to be configured from network tree and click Configure to launch the configuration Web

interface. Refer to the Access Point 7250 User Guide (included on the installation CD) for

detailed information and instructions on locating and configuring the access point.

The first time you connect to this device, you will need to specify how the device obtains its

IP address; for most installations we recommend that you select "Obtain the setting

automatically from a DHCP server." For more information, see your network administrator.

Once you have logged onto the device, we strongly recommend changing the default

password. You can find password settings in the administration menu.

If you experience difficulty with the installation, see the Troubleshooting section of the

User Guide.

For the latest information, see the 3Com Corporation World Wide Web site: http://www.3com.com/.

trademarks of 3Com Corporation. All other company and product names may be trademarks of the respective

companies with which they are associated.

09-2340-000 Rev AA

Published December 2003

SuperStack

are registered