Crucial Audio Die Gotterdämmerung Operating Instructions Manual - Page 4

Browse online or download pdf Operating Instructions Manual for Modulator Crucial Audio Die Gotterdämmerung. Crucial Audio Die Gotterdämmerung 6 pages.

Print Page

RANGE HI/LOW Switch: Selects the Ring Mod's Carrier Frequency control range. Set HI for bell like and

wild sounds. Select LOW for a range from vibrato to throaty modulation.

MOD DEPTH : Sets the Carrier Frequency Modulation Range from minimal to maximum frequency swings.

MOD RATE :

Sets the Speed for theCarrier Frequency Modulation.

WAVEFORM Switch : Selects the Carrier Frequency Modulation waveshape. Select Triangle or Square

Wave modulation.

PITCH EXP JACK : This Mono ¼" Jack provides Carrier Frequency Expression pedal input. Use an

expression pedal with a shielded mono cable to vary the Ring Mod's Carrier Frequency.

FREQ IN JACK : This Mono ¼" Jack provides for an External Carrier Frequency reference. Use this input to

slave to another Ring Modulator or frequency reference.

FREQ OUT JACK : This Mono ¼" Jack outputs the Carrier Frequency reference. Use this output to slave to

another Ring Modulator or to provide a frequency reference.

HI-Z OUT: This unbalanced ¼" jack provides a high impendance output signal to your amplifier, mixing

console, or other effect units.

HI-Z IN : Unbalanced, high impedance ¼" input is optimized for a variety of input levels.

POWER ADAPTER INPUT: Use only approved AC Power Adapter (18Vac 1 Amp)

Front Side Panel

Side Panels