ARIETE 578 Manual - Page 8

Browse online or download pdf Manual for Blender ARIETE 578. ARIETE 578 17 pages.

Print Page

E N

Never remove the lid (B) during use or when the goblet is positioned on the motor body: a

safety closing system locks the lid on the goblet. Remove the goblet from the motor body

before lifting the lid to avoid damages to the safety lock.

Never pour hot liquids into the blender. The liquids must be within 50°C and must not exceed

the 800 ml level in the goblet.

Pay attention when removing the cap (A) to add and mix the hot ingredients. Steam may come

out unexpectedly.

Keep the food presser away from blades to avoid damage.

Recipe

1. Prepare a mixture based of 800g of soaked carrots and 1200g of water.

2. Operate the appliance for 2 min.

3. If another operation is needed, cool down the appliance for at least 1 min.

AFTER PROCESSING

1. At the end of a program (crush, smooth, soup...), after 3 minutes downtime, the appliance enters

the stand-by mode: the ON-OFF button (L) will go on with the corresponding flashing red light,

while the other buttons/lights will remain off.

- At this point, to proceed with another use of the appliance, press the ON-OFF button (L) which

flashes (the only light on). The whole panel and the texts on the dial (G) will go on and the "RESET"

function will start flashing.

- Rotate the dial (G) to proceed with the selection of one function, or press the increase/decrease

buttons of time and speed to enter the manual mode.

- Press the ON-OFF button (L) to start the program.

2. At the end of a program, if the goblet (C) is removed from the motor body (E), e.g. for pouring, and

immediately after it is placed back properly, after 3 minutes downtime, the appliance enters the

stand-by mode: the ON-OFF button (L) will go on with the corresponding flashing red light, while

the other buttons/lights will remain off.

- At this point, press the ON-OFF button (L) which flashes (the only light on). The whole panel and

the texts on the dial (G) will go on.

- Press any other button, but NOT the ON-OFF button (L) to restart the appliance. The "RESET"

function will start flashing.

- Rotate the dial (G) to proceed with the selection of one function, or press the increase/decrease

buttons of time and speed to enter the manual mode.

- Press the ON-OFF button (L) to start the program.

- 6 -