Crunch DSX572 Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Speakers Crunch DSX572. Crunch DSX572 4 pages.

Print Page

INSTALLATION

The first step of installing a speaker system is a well-thought-out planning. Choose a suitable location

for your speaker components carefully. Please observe the following suggestions to ensure proper

results and best performance:

1. Choose a location which offers none or just a minimum of obstacles between the components and

your ears. Please observe at thereto, the positions of the driver's seat, the headrests and other

constructions of the inside of vehicle interior.

2. Mount the left and right speakers in the same array on each side, which means that they are installed

at the same height and directly across from each other. Do not install one speaker higher, lower, further

forward or further back from the opposite speaker.

3. Always check what's behind the chosen mounting locations to ensure that there is proper clearance

for the back of the speaker components and avoid obstructions such as window tracks, wire harnesses,

gas tank etc.

4. The best performance will be achieved, when the speakers are securely mounted to a designated

speaker opening in a door panel or a rear speaker shelf. There should be no gaps between the speaker

basket and the mounting surface.

SPEAKER INTERCONNECTION

• Connect the positive terminals ("+") and the negative terminals ("–") of the speakers

with the according speaker outputs of the amplifier.

• Use for the interconnection the supplied cables with jacks.

SPEAKER LEFT

TERMINALS FOR THE

AMPLIFIER CONNECTION

LEFT CHANNEL

Please observe the correct polarity (+ and –) of all connections.

SPEAKER RIGHT

TERMINALS FOR THE

AMPLIFIER CONNECTION

RIGHT CHANNEL

IMPORTANT

ENGLISH