Dimplex contempra ef KDS6401E Parts & Service Manual - Page 12
Browse online or download pdf Parts & Service Manual for Stove Dimplex contempra ef KDS6401E. Dimplex contempra ef KDS6401E 16 pages. Dimplex - the glen dimplex group stove user's guide
Also for Dimplex contempra ef KDS6401E: Practical User's Manual (10 pages), Parts & Service Manual (19 pages)
Print Page
KDS6401E CONTEMPRA
If the stove was operating prior to servicing allow at least 10 minutes for light
bulbs and heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE FLAME MOTOR/FLAME ROD
1. Remove the stove pipe kit (if equipped).
2. Remove the four screws from the rear panel and remove.
3. Locate the flame motor and flame rod assembly, remove the motor
mounting screws with a short handled screw driver.
4. Locate and remove the wiring connections and remove the flame rod and
flame motor assembly.
NOTE: When removing the flame motor some damage may occur to the
flame rod. If flame rod is damaged replace to insure proper operation.
5. To remove the flame rod attach needle nose pliers to the spring on the
motor shaft and pull while rotating in the opposite direction of the spring
winding.
6. To replace the flame rod attach needle nose pliers to the flame rod spring
and push onto the flame motor shaft while rotating in the opposite
direction of the spring winding.
7. Properly orientate the flame motor and connect all of the wiring clips
connections in their original locations.
12