Dimplex contempra ef KDS6401E Parts & Service Manual - Page 5
Browse online or download pdf Parts & Service Manual for Stove Dimplex contempra ef KDS6401E. Dimplex contempra ef KDS6401E 16 pages. Dimplex - the glen dimplex group stove user's guide
Also for Dimplex contempra ef KDS6401E: Practical User's Manual (10 pages), Parts & Service Manual (19 pages)
Print Page
KDS6401E CONTEMPRA
LIGHT BULB REPLACEMENT
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid
accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or
when the clarity and detail of the log exterior disappears. There are two bulbs
under the log set which generate the flames and embers.
GLASS CLEANING
The glass is cleaned in the factory during the assembly operation. During
shipment, installation, handling, etc., the glass surface may collect dust particles;
these can be removed by buffing lightly with a clean dry cloth.
To remove fingerprints or other marks, the glass can be cleaned with a damp cloth
using a good quality household glass cleaner. The glass should be completely
dried with a lint free cloth or paper towel. Do not use abrasive cleaners on glass
surface or spray liquids directly onto any surface.
ef
contempra
SURFACE CLEANING
Use warm water only to clean painted surfaces of the contempra
abrasive cleaners on surface or spray liquids directly onto any surface.
TO REPLACE THE LIGHT BULBS
1.
On the back of the contempra
cover.
2.
Remove the light access cover.
4. Reach into the opening, locate and examine the bulbs to determine which
bulb(s) required replacement.
1.
Unscrew the bulb(s) counter clockwise.
2.
Insert new bulb(s).
7. Install the light access cover and install the screws
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of
their rated life. Group replacement will reduce the number of times you need to
open the unit to replace light bulbs.
BULB REQUIREMENTS
Quantity of 2 clear chandelier or candelabra bulbs with an E-12 (small) socket
base, 60 watt rating. Example GE 60BC of Philips 60 CTC.
ef
remove the screws from the light access
5
ef
. Do not use