Aeon Labs Aeotec Micro Smart Energy Switch G2 Manual - Page 5

Browse online or download pdf Manual for Switch Aeon Labs Aeotec Micro Smart Energy Switch G2. Aeon Labs Aeotec Micro Smart Energy Switch G2 11 pages.

Print Page

Signal connection – Using two 18 AWG copper wires, connect the terminals

of the wall switch to Micro Smart Energy Switch G2 as shown.

Make sure that the ends of the wires from the wall box are straight

(cut if neccessary).

Remove insulation from each wire and the wall box as shown.

Side wire connection

Mounting In Wall Box.

Position all wires to provide room for the device. Place Micro Smart Energy

Switch G2 inside the wall box towards the back of the box.

5/14