Aeon Labs AEOEZW100 Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Accessories Aeon Labs AEOEZW100. Aeon Labs AEOEZW100 11 pages. Routing multisensor

Print Page
Value
Threshold change in luminance to induce an automatic report. (Parameter Number 43, Parameter Size
Value
Threshold change in battery level to induce an automatic report. (Parameter Number 44, Parameter Size
high byte is the part of integer, the low byte is the fractional part.
Value
Threshold change in ultraviolet to induce an automatic report. (Parameter Number 45, Parameter Size
Value
Enable/disable to send the alarm report of low temperature(<-15℃) (Parameter Number 46, Parameter Size
be reduced at low temperatures (-15 degrees Celsius and below), which will lead to the product may not work normally. It is recommended
to use USB power at low temperatures.
Value Description
0
disable (Default)
1
enable (The MultiSensor will report the Multi Level Temperature CC with the value=0xFFFF to controller if the current temperature is less than -15℃).
(Parameter Number 100, Parameter Size
Value
Which report needs to be sent in Report group 1 (Parameter Number 101, Parameter Size 4)
Value
Description
1
0-7 = reserved
2
0-7 = reserved
3
0-7 = reserved
4
0 = Battery 1-3 = reserved 4 = ultraviolet 5 = temperature 6 = Humidity 7 = Luminance
Which report needs to be sent in Report group 2 (Parameter Number 102, Parameter Size 4)
Value
Description
Description
Description
Description
Description
1)Set 101-103 to default.
Description
2)Default Value = 100 LUX
2)The accuracy is 0.1. The
2)Default Value = 2
1)The battery activity will