Aeon Labs Aeotec MULTISENSOR 6 Manual - Page 8

Browse online or download pdf Manual for Accessories Aeon Labs Aeotec MULTISENSOR 6. Aeon Labs Aeotec MULTISENSOR 6 14 pages.
Also for Aeon Labs Aeotec MULTISENSOR 6: User Manual (11 pages)

Print Page

a few seconds, then inclusion has been successful. If the green

LED blinks when the button is pressed, the inclusion has been

unsuccessful and you should repeat the above steps.

Press any button on your Minimote to return it to inclusion mode.

Selecting a location for your MultiSensor.

MultiSensor can bring its intelligent readings to many locations of

your home which includes outside of your home. Please note that

when installed outdoors of your home, your MultiSensor should only

be relied on for temperature, light, humidity, and ultraviolet readings,

where as the motion sensing capabilities should be disabled on

your gateway in order to avoid false readings.

Light can impact on the quality of motion readings, it's also

important to understand environmental changes that may impact

on other readings within your home. Specifically, your MultiSensor

should not be installed in areas of artificial temperature change.

Thus, when selecting a location, avoid placing it beside or near

air conditioners, humidifiers, and heaters, and avoid positioning it

directly opposite a window or direct sunlight.

Selecting a location for your MultiSensor to be installed depends on

the use case. Whatever the case or the installation location, please

ensure that it fits with your sensor's effective motion sensing range

as described in these diagrams.

For ceiling mounting using the Back-Mount Arm:

The "Warranty Period" begins on the date the Products is delivered

and continues for 12 months.

Any repairs under this warranty must be conducted by an

authorized Aeon Labs service representative and under Aeon Labs'

RMA policy. Any repairs conducted by unauthorized persons shall

void this warranty.

Excluded from the warranty are problems due to accidents, acts

of God, civil or military authority, civil disturbance, war, strikes,

fires, other catastrophes, misuse, misapplication, storage damage,

negligence, electrical power problems, or modification to the

Products or its components.

Aeon Labs does not authorize any person or party to assume or

create for it any other obligation or liability in connection with the

Products except as set forth herein.

Aeon Labs will pass on to Customer all manufacturers' Material

warranties to the extent that they are transferable, but will not

independently warrant any Material.

Customer must prepay shipping and transportation charges for

returned Products, and insure the shipment or accept the risk of

loss or damage during such shipment and transportation. Aeon

Labs will ship the repaired or replacement products to Customer

freight prepaid.

Customer shall indemnify, defend, and hold Aeon Labs and Aeon