Aeon Labs Garage Door Controller Gen5 User Manual - Page 7

Browse online or download pdf User Manual for Controller Aeon Labs Garage Door Controller Gen5. Aeon Labs Garage Door Controller Gen5 11 pages.

Print Page

17.09.2018

3. Affix your sensor mounting plate to the garage door.

The sensor mount plate should be installed on the top of the garage door (on the left, middle, or right side). Now affix

your sensor mounting plate to the surface. Your mounting plate can be affixed using screws or double-sided tape.

If you are using screws, attach the mounting plate to the respective surface using the two 20mm screws provided.

If you are using double-sided tape, wipe the two surfaces clean of any oil or dust with a damp towel. When the surface has

completely dried, peel one side of the tape back and attach it to the corresponding section on the rear side of the mounting

plate.

You can choose each of way from these 2 installations above. Just need to note if the environment temperature of the

garage door is less than -5 C, we suggest to choose the first way (using screws to affix the mounting plate) that would

be more stable.

4. Lock your Sensor on the mounting plate.

https://aeotec.freshdesk.com/support/solutions/articles/6000053811-garage-door-controller-gen-5-user-guide-

Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs

7/11