Pioneer AVH-X7550BT Firmware Update Procedures

Browse online or download pdf Firmware Update Procedures for Car Receiver Pioneer AVH-X7550BT. Pioneer AVH-X7550BT 6 pages. System firmware update

Print Page

System Firmware Update Instructions for Pioneer AVH-X7550BT

IMPORTANT

This firmware update (version 8.25) applies only to the Australian model: AVH-X755 0BT

Please download and print these Firmware Update instructions before downloading and installing the firmware

update. It is important that you complete all steps correctly and in the order described below.

If you have any questions, please contact Pioneer Australia Customer Support:1800-672-102 or email us via

pioneerelectronics.com.au

In order to perform this update, the following items are needed:

• Pioneer AVH-X7550BT

• A blank USB storage device (no files), 2 GB or larger in capacity, formatted to FAT32.

• DO NOT turn your unit off or disconnect the USB storage device while the firmware is being updated.

• You can only update the firmware when the vehicle is stopped and the parking brake is engaged.

PROCEDURE

1. Start the vehicle engine.

2. Press the [Home] button.

3. Touch the [AV source] & touch [Off] to source Off.

*This picture shows typical region source. It's not complete same your region.