Pioneer AVIC-D2 Hardware Manual - Page 10

Browse online or download pdf Hardware Manual for Car Receiver Pioneer AVIC-D2. Pioneer AVIC-D2 27 pages. Double-din dvd navigation system
Also for Pioneer AVIC-D2: Owner's Manual (34 pages), Quick Start Manual (2 pages), Service Manual (23 pages)

Print Page

About the XM NAVTRAFFIC

Logo

Required $12.95 basic monthly XM radio sub-

scription and XM NavTraffic service subscriptions

sold separately. XM NavTraffic only available in

select markets. Other fees and taxes, including a

one-time activation fee, may apply. Subscription

fee is consumer only. All fees and programming

subject to change. Subscriptions subject to Cus-

tomer Agreement available at xmradio.com. XM

radio service only available in the 48 contiguous

United States.

NAVTEQ Traffic- is a trademark of NAVTEQ North

America, LLC.-2005. NAVTEQ North America,

LLC.

To Protect the LCD Screen

❒ Do not allow direct sunlight to fall on the dis-

play when this product is not being used.

Extended exposure to direct sunlight can

result in LCD screen malfunction due to the

resulting high temperatures.

❒ When using a portable phone, keep the

antenna of the portable phone away from the

display to prevent disruption of the video by

the appearance of spots, colored stripes, etc.

❒ Never touch the screen with anything besides

your finger when operating the Touch Panel

functions. The screen can scratch easily.

For Viewing LCD Comfortably

Due to its construction, the view angle of the LCD

screen is limited. The viewing angle can be

increased, however, by using BRIGHTNESS to

adjust the black density of the video. When using

for the first time, adjust the black density in

accordance with the viewing angle to adjust for

clear viewing. DIMMER can also be used to

adjust the brightness of the LCD screen itself to

suit your personal preference.

Resetting the Microprocessor

• Pressing the RESET button deletes the

contents of the navigation system's mem-

ory. For details, see section "About the

Data being Deleted" of the Operation Man-

ual.

Pressing the RESET button lets you reset the

microprocessor to its initial settings without

changing the condition memory.

The microprocessor must be reset under the fol-

lowing conditions:

• Prior to using this product for the first time

after installation.

• If the product fails to operate properly.

• If there appear to be problems with the opera-

tion of the system.

• When changing the combination of the equip-

ment.

• When adding/removing additional products

that connect to the product.

Turn the ignition switch OFF.

Press the RESET button with a pen tip or

other pointed instrument.

RESET button