Pioneer AVIC-X1R Hardware Manual - Page 10
Browse online or download pdf Hardware Manual for Car Receiver Pioneer AVIC-X1R. Pioneer AVIC-X1R 27 pages. Dvd av navigation head-unit
Also for Pioneer AVIC-X1R: Manual (39 pages), Hardware Manual (30 pages)
Print Page
❒ With some discs, audio language and subtitle
language are automatically specified, in
which case condition memory does not func-
tion.
❒ When the number of discs exceeds 30, set-
tings for the latest disc replace those for the
least recent disc.
What the marks on DVDs indi-
cate
The marks below may be found on DVD disc
labels and packages. They indicate the type of
images and audio recorded on the disc, and the
functions you can use.
Mark
Meaning
Indicates the number of audio systems.
2
Indicates the number of subtitle lan-
2
guages.
Indicates the number of viewing angles.
3
Indicates the picture size (aspect ratio:
16 : 9 LB
screen width-to-height ratio) type.
Indicates the number of the region
2
ALL
where playback is possible.
If the marks other than listed are found on DVD
disc labels and packages, please ask for the DVD
disc supplier for their meaning.
When an operation is prohibited
When you are watching a DVD and attempt to
perform an operation, sometimes it may not be
performed because of the programming on the
disc. When this happens, this unit indicates the
icon
on the screen.
❒ The icon
may not appear in certain discs.
Resetting the microprocessor
• Pressing the RESET button deletes the
contents of the product's memory. For
details, see section "About the Data being
Deleted" of the Operation Manual.
8
Pressing RESET button lets you reset the micro-
processor to its initial settings without changing
the condition memory.
The microprocessor must be reset under the fol-
lowing conditions:
• Prior to using this unit for the first time after
installation.
• If the unit fails to operate properly.
• If there appear to be problems with the opera-
tion of the system.
• When changing the combination of the equip-
ment.
• When adding/removing additional products
that attach to the unit.
• When the display and the Hide-away units are
re-connected.
1
Turn the ignition switch OFF.
2
Press RESET button with a pen tip or
other pointed instrument.
RESET button
❒ If you have connected other equipment (for
example, a TV tuner) to this by cable, be sure
to reset that equipment too.
❒ After completing connections or when you
want to erase all memorised settings or return
the unit to its initial (factory) settings except
for some navigation items, switch your engine
ON or set the ignition switch to ACC ON
before pressing RESET button.
➲ For details, refer to "About the Data being
Deleted" of the Operation Manual.