Pioneer AVIC-Z2 - Navigation System With DVD player Hardware Manual - Page 16
Browse online or download pdf Hardware Manual for Car Receiver Pioneer AVIC-Z2 - Navigation System With DVD player. Pioneer AVIC-Z2 - Navigation System With DVD player 24 pages. Dvd multimedia av navigation server
Also for Pioneer AVIC-Z2 - Navigation System With DVD player: Firmware Update Instructions (5 pages), Quick Start Manual (2 pages)
Print Page
Turning the Source Off
• Press the AV button and hold until the
source turns off.
❒ This navigation system also can be
switched off by turning the ACC (ignition)
OFF.
Inserting/Ejecting a Disc
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
• Do not use with the LCD panel left open. If
LCD panel is left open, it may result in
injury in the event of an accident.
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
• Do not operate this navigation system
until the LCD panel completely opens or
closes. If this navigation system is oper-
ated while the LCD panel is opening or
closing, the LCD panel may stop at that
angle for safety.
• Do not place a glass or a can on this navi-
gation system when the LCD panel is
open. Doing so may break this navigation
system.
➲ For details, refer to "Handling and Care of the
Disc" in the end of this manual and "Detail
information for playable media" in the Opera-
tion Manual.
14
Inserting a disc
1
Press the OPEN CLOSE button.
The LCD panel opens, and the disc loading
slot appears.
Disc loading slot
❒ To close the LCD panel, press the OPEN
CLOSE button again.
When a disc is already set
The above screen is displayed.
Make sure the disc loading slot is empty before
inserting a disc into the slot.
2
Insert a disc into the disc loading slot.
If you insert a disc, the LCD panel closes auto-
matically, and then format reading will start.
❒ When the ignition switch is turned off (ACC
OFF) with the LCD panel open, the LCD panel
remains open. Always make sure to close the
LCD panel before turning the ignition switch
off.
❒ Do not insert anything other than a disc into
the disc loading slot.
EJECT button