Pioneer CDX-M1026ZG Service Manual - Page 37

Browse online or download pdf Service Manual for Car Receiver Pioneer CDX-M1026ZG. Pioneer CDX-M1026ZG 45 pages. Multi-compact disc player

Print Page

12. To see the amount of dislocation, place the mechanism upside-down.

If the stopper bend has been dislocated in the direction of the sev-

enth CD, turn VR802 to the left(Fig. 2).

To lower the stage toward the twelfth step by 0.1 mm, reduce the

voltage of EREF (adjusted in step 8) by 20 mV.

If the stopper bend has been dislocated in the direction of the twelfth

CD, turn VR802 to the right(Fig. 4).

To raise the stage toward the seventh step by 0.1 mm, increase the

voltage of EREF (adjusted in step 8) by 20 mV.

13. Place the mechanism horizontal. Go back to step 11 to reconfirm the

stage height.

14. When adjustment of the stage height is completed, proceed as fol-

lows:

15. Open the door and then eject the magazine assy.

16. Once operation of the mechanism has stopped, turn the power OFF.

17. Wait more than one minute after the power is turned off, then turn the power ON and insert a magazine.

18. Check if the mechanism operates correctly with the first, sixth, seventh and twelfth CDs.

19. If the mechanism operates properly, adjustment is completed. If the mechanism operates improperly, make the

adjustment again.

CDX-M1026ZG

VR802

GND

EREF

mV meter