Pioneer DEH-10MP Owner's Manual - Page 15

Browse online or download pdf Owner's Manual for Car Receiver Pioneer DEH-10MP. Pioneer DEH-10MP 26 pages.

Print Page

Section

(~I_ns_t_a_lI_at_i_o_n

::s

U )

:::r

Rubber bush

Screw

Mounting sleeve

Dashboard

•

It becomes easy to remove the trim ring if

the front panel is released.

Trim ring

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Removing the unit

Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with a groove downwards and attach it.)

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°)

into place.

Install the unit.

DIN front/rear mount

This unit can be properly installed either from

"Front" (conventional DIN front-mount) or

"Rear" (DIN rear-mount installation, utilizing

threaded screw holes at the sides of unit chas-

sis). For details, refer to the following installa-

tion methods.

DIN Front-mount

Installation with the rubber bush

Insert the mc:>Unting sleeve into the

dashboard.

When installing if") a shallow space, use a sup-

plied mounting sieeve.

there is enough

space behind the unit, use factory supplied

mounting sleeve.

Important

•

Check all connections and systems before

fi nal installation.

•

Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

•

Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

•

Do not install this unit where:

it may interfere with operation of the vehi-

cle.

it may cause injury to a passenger as a re-

sult of a sudden stop.

• The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

•

Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

(]I)