Din Sync SARA VCF Manual - Page 2
Browse online or download pdf Manual for Control Unit Din Sync SARA VCF. Din Sync SARA VCF 13 pages.
Print PageWho reads manuals anyway?
I know right? but please take a quick read of the following.
Installation
The SARA VCF has reverse power protection, so plugging the power cable in backwards should
result in no damage to the module itself. However plugging things in backwards is never a good
idea and could potentially damage other parts of your system. The protection is there in case of
plugging the power cable in backwards by accident, please still take care to check the orientation
of the cable when connecting it for the first time.
figure 1 the correct and wrong way to connect power
Before installing please power off your modular case. Connect one end of the cable to the
module as shown in figure 1. Connect the other end of the cable to your modular case bus
board, please check your case's manual for the correct orientation. The stripe on the cable
should be connected to 12. We have now started using keyed connectors on our power cables.
If you have a busboard with a shrouded header please confirm that the red stripe is at 12v
before powering your system. After you have connected the power you can mount the module
using the included screws, SARA VCF requires 16HP of cabinet space.