Pioneer DEH-2910MP Operation Manual - Page 8

Browse online or download pdf Operation Manual for Car Receiver Pioneer DEH-2910MP. Pioneer DEH-2910MP 42 pages. Cd rds receiver

Print Page

Section

Operating this unit

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

Press FUNCTION to select LOCAL.

Press a or b to turn local seek tuning

on or off.

Press c or d to set the sensitivity.

FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

MW/LW: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1 to 6.

Once stored you can tune in to those frequen-

cies with the touch of button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 1 to 6.

Press FUNCTION to select BSM.

Press a to turn BSM on.

Six strongest broadcast frequencies will be

stored in the order of their signal strength.

# To cancel the storage process, press b.

RDS

Introduction of RDS operation

RDS (radio data system) contains inaudible in-

formations that helps searching of the radio

stations.

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only

active when your radio is tuned to an RDS

station.

Switching the RDS display

% Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Program service name—PTY information—

Frequency

PTY (program type ID code) information is

listed on page 10.

# PTY information and the frequency appear on

the display for eight seconds.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,

the unit receives it automatically (ALARM ap-

pears). When the broadcasting ends, the sys-

tem returns to the previous source.

! An emergency announcement can be can-

celed by pressing TA.

Selecting alternative frequencies

When the tuner can't get good reception, the

unit automatically search for a different sta-

tion in a same network.

% Press and hold TA repeatedly to turn AF

(alternative frequency search) on or off.

Notes

! You can also turn the AF function on or off in

the menu that appears with the pressing of

FUNCTION.

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.