Pioneer DEH-4300UB Owner's Manual - Page 10
Browse online or download pdf Owner's Manual for Car Receiver Pioneer DEH-4300UB. Pioneer DEH-4300UB 49 pages. Cd rds receiver
Also for Pioneer DEH-4300UB: Owner's Manual (17 pages)
Appendix
Additional Information
Troubleshooting
Symptom
Cause
Action
The display
You did not per-
Perform operation
automatically
form any opera-
again.
returns to the
tion within about
ordinary dis-
30 seconds.
play.
The repeat play
Depending on
Select the repeat
range changes
the repeat play
play range again.
unexpectedly.
range, the se-
lected range may
change when se-
lecting another
folder or track, or
when fast for-
warding/rever-
sing.
A subfolder is
Subfolders can-
Select another re-
not played
not be played
peat play range.
back.
when FOLDER
(folder repeat) is
selected.
NO XXXX ap-
There is no text
Switch the display
pears when a
information em-
or play another
display is chan-
bedded.
track/file.
ged (NO TITLE,
for example).
! Press
The display is
Demo mode is
illuminated
on.
cel demo mode.
! Turn off the
when the unit
is turned off.
demo display set-
ting.
The unit is mal-
You are using a
Move electrical de-
functioning.
device, such as a
vices that may be
There is inter-
cellular phone,
causing the inter-
ference.
that transmits
ference away from
electric waves
the unit.
near the unit.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
18
En
Built-in CD Player
Message
Cause
Action
ERROR-11, 12,
The disc is dirty.
Clean the disc.
17, 30
The disc is
Replace the disc.
scratched.
ERROR-10, 11,
There is an elec-
Turn the ignition
12, 15, 17, 30,
trical or mechan-
switch OFF and
A0
ical error.
back ON, or switch
to a different
source, then back
to the CD player.
ERROR-15
The inserted disc
Replace the disc.
is blank
ERROR-23
Unsupported CD
Replace the disc.
format
FRMT READ
Sometimes there
Wait until the mes-
is a delay be-
sage disappears
tween the start of
and you hear
playback and
sound.
when you start to
hear any sound.
NO AUDIO
The inserted disc
Replace the disc.
does not contain
any playable
files.
SKIPPED
The inserted disc
Replace the disc.
contains DRM
to can-
protected WMA
files.
PROTECT
All the files on
Replace the disc.
the inserted disc
are embedded
with DRM.
USB storage device/iPod
Message
Cause
Action
! Turn the plug
NO DEVICE
When plug and
play is off, no
and play on.
! Connect a com-
USB storage de-
vice or iPod is
patible USB sto-
connected.
rage device/iPod.
FRMT READ
Sometimes there
Wait until the mes-
is a delay be-
sage disappears
tween the start of
and you hear
playback and
sound.
when you start to
hear any sound.
Additional Information
Message
Cause
Action
NO AUDIO
There are no
Transfer the audio
songs.
files to the USB
storage device and
connect.
The connected
Follow the USB
USB storage de-
storage device in-
vice has security
structions to dis-
enabled
able the security.
SKIPPED
The connected
Play an audio file
USB storage de-
not embedded with
vice contains
Windows Media
WMA files em-
DRM 9/10.
bedded with
Windows Med-
iaä DRM 9/10
PROTECT
All the files in the
Transfer audio files
USB storage de-
not embedded with
vice are em-
Windows Media
bedded with
DRM 9/10 to the
Windows Media
USB storage de-
DRM 9/10
vice and connect.
! Connect a USB
N/A USB
The connected
USB storage de-
Mass Storage
vice is not sup-
Class compliant
ported by this
device.
! Disconnect your
unit.
device and replace
it with a compati-
ble USB storage
device.
Message
Cause
Action
CHECK USB
The USB connec-
Check that the
tor or USB cable
USB connector or
has short-
USB cable is not
circuited.
caught in some-
thing or damaged.
The connected
Disconnect the
USB storage de-
USB storage de-
vice consumes
vice and do not
more than 500
use it. Turn the
mA (maximum
ignition switch to
allowable cur-
OFF, then to ACC
rent).
or ON and then
connect only com-
pliant USB storage
devices.
The iPod oper-
Make sure the con-
ates correctly but
nection cable for
does not charge
the iPod has not
shorted out (e.g.,
not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
! Perform one of
ERROR-19
Communication
failed.
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
! Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
iPod failure
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
En
Appendix
19