Pioneer DEH-4590BT Owner's Manual - Page 15

Browse online or download pdf Owner's Manual for Car Receiver Pioneer DEH-4590BT. Pioneer DEH-4590BT 25 pages. Cd rds receiver

Print Page

Operating this unit

The rear speaker leads output and the RCA output

of this unit can be used to connect a full-range

speaker or subwoofer. Select a suitable option for

your connection.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

You can select any one of the options in the fol-

lowing list:

! REAR/SUB.W – Select when there is a full-

range speaker connected to the rear speak-

er leads output and there is a subwoofer

connected to the RCA output.

! SUB.W/SUB.W – Select when there is a

subwoofer connected directly to the rear

speaker leads output without any auxiliary

amp and there is a subwoofer connected

to the RCA output.

! REAR/REAR – Select when there is a full-

range speaker connected to the rear speak-

er leads output and the RCA output.

If there is a full-range speaker connected to

the rear speaker leads output and the RCA

output is not used, you may select either

REAR/SUB.W or REAR/REAR.

S/W UPDATE (updating the software)

This function is used to update this unit with the

latest Bluetooth software. For about Bluetooth

software and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to display the data transfer mode.

Follow the on-screen instructions to finish up-

dating the Bluetooth software.

System menu

Press and hold SRC/OFF until the unit

turns off.

Press and hold M.C. until the main menu

appears in the display.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to select the system menu

function.

Once selected, the following system menu func-

tions can be adjusted.

For details, refer to System menu on page 12.

Using an AUX source

Insert the stereo mini plug into the AUX

input jack.

Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on page 12.

Switching the display

Selecting the desired text information

1 Press DISP/DISP OFF to cycle between the fol-

lowing:

! Source name

! Source name and clock

Turning the display off or on

% Press and hold DISP/DISP OFF until the

display turns on or off.

If an unwanted display appears

Turn off the unwanted display using the proce-

dures listed below.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Operating this unit

Turn M.C. to display DEMO OFF and press

to select.

Turn M.C. to switch to YES.

Press M.C. to select.

Section