Pioneer DEH-4700BT Operation Manual - Page 14

Browse online or download pdf Operation Manual for Car Receiver Pioneer DEH-4700BT. Pioneer DEH-4700BT 20 pages. Cd rds receiver
Also for Pioneer DEH-4700BT: Quick Start Manual (33 pages)

Print Page
Pioneer DEH-4700BT Operation Manual
Menu Item
APP CONN. SET*2
[WIRED], [BLUETOOTH]
*1 [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once
the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may
continue to draw power from the battery if your vehicle's ignition does not have an ACC (accessory)
position.
*2 Not available when [APP] is selected as the source.

ILLUMINATION settings

Menu Item
COLOUR (Only for DEH-X5700BT)
[KEY COLOUR], [DISP COLOUR],
[BOTH COLOUR]
DIM SETTING
[SYNC ILLUMI]*, [SYNC CLOCK],
[MANUAL]
* Only for DEH-X5700BT
BRIGHTNESS
[1] to [10]
14
En
Description
Select the appropriate connection method
according to your device.
Description
Select color for the keys/display of the unit from
12 preset colors, [SCAN] or [CUSTOM]*.
• [SCAN]: Cycle through a variety of colors
automatically.
• [CUSTOM]*:
1 Press and hold the M.C. dial until the color
setting display appears.
2 Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C. dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOUR] and [DISP COLOUR].
Change the display brightness.
Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
Menu Item
PHONE COLOUR (Only for DEH-X5700BT)
[FLASHING]
[FLASH FX1] to [FLASH FX6]
[OFF]
ILLUMI FX (Only for DEH-X5700BT)
[ON], [OFF]

MIXTRAX settings

(Only for DEH-X5700BT)
Menu Item
SHORT PLAYBCK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [OFF]
FLASH AREA
[KEY/DISPLAY], [KEY], [OFF]
FLASH PATTERN
[SOUND LEVEL 1] to [SOUND LEVEL
6]
[LOW PASS 1] to [LOW PASS 6]
[RANDOM1]
[RANDOM2]
Description
Select the key color when a call is received.
Applies the color set by [KEY COLOR].
Cycle through a variety of colors automatically.
No change in key color made.
The illumination effect can be seen when;
– there is an incoming call
– you are on a phone call
– a CD is inserted/ejected
The illumination effect will activate when the
ACC power is turned on/off regardless of this
setting.
Description
Select the length of the playback time.
Select the area for the illumination effect.
When [OFF] is selected, the color set under the
ILLUMINATION settings (page 14) is used as the
display color.
Change the illumination effect according to
the sound and bass level.
The flash pattern changes according to the
sound level.
The flash pattern changes according to the
bass level.
The flash pattern changes randomly according
to the sound level mode and low pass mode.
The flash pattern changes randomly according
to the sound level mode.