Pioneer DEH-6400BT Operation Manual - Page 10

Browse online or download pdf Operation Manual for Car Receiver Pioneer DEH-6400BT. Pioneer DEH-6400BT 36 pages. Cd rds receiver
Also for Pioneer DEH-6400BT: Owner's Manual (25 pages), Quick Start Manual (8 pages)

Print Page

Section

Operating this unit

! The tuner automatically stores the three lat-

est radio text broadcasts received, repla-

cing the oldest text with the newest text.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

! If MW/LW band is selected, only BSM,

Local and Tuning Mode are available.

BSM (best stations memory)

BSM (best stations memory) automatically stores the

six strongest stations in the order of their signal

strength.

1 Press M.C. to turn BSM on.

To cancel, press M.C. again.

Regional (regional)

When Alternative FREQ is used, the regional func-

tion limits the selection of stations to those broad-

casting regional programs.

1 Press M.C. to turn the regional function on or off.

Local (local seek tuning)

Local seek tuning lets you tune in to only those radio

stations with sufficiently strong signals for good re-

ception.

1 Press M.C. to turn local on.

! To cancel, press M.C. again.

2 Turn LEVER left or right to select the desired set-

ting.

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow the

reception of weaker stations.

PTY search (program type selection)

You can tune in to a station using PTY (program type)

information.

1 Turn LEVER left or right to select the desired set-

ting.

News&Inf—Popular—Classics—Others

2 Press M.C. to begin the search.

The unit searches for a station broadcasting that

type of program. When a station is found, its pro-

gram service name is displayed.

PTY (program type ID code) information is listed

in the following section. Refer to PTY list on the

previous page.

To cancel the search, press M.C. again.

The program of some stations may differ from

that indicated by the transmitted PTY.

If no station is broadcasting the type of program

you searched for, Not found is displayed for

about two seconds and then the tuner returns to

the original station.

Traffic Announce (traffic announcement standby)

1 Press M.C. to turn traffic announcement standby

on or off.

Alternative FREQ (alternative frequencies search)

When the tuner cannot get a good reception, the unit

automatically searches for a different station in the

same network.

1 Press M.C. to turn the alternative frequencies

search on and off.

News interrupt (news program interruption)

1 Press M.C. to turn the NEWS function on or off.

Tuning Mode (LEVER tuning setting)

You can assign a function to the LEVER on the unit.

Select Manual (manual tuning) to tune up or down

manually or select Preset (preset channel) to switch

between preset channels.

1 Press M.C. to select Manual or Preset.