Pioneer DEH-8300SD Operation Manual - Page 7
Browse online or download pdf Operation Manual for Car Receiver Pioneer DEH-8300SD. Pioneer DEH-8300SD 28 pages. Cd rds receiver
Print Page
Operating this unit
Tuner
Basic Operations
1
2
3 4
8 9
a
1
2
3 4
1 TAG indicator
2 Tags transferring indicator
3 Band indicator
4 5 (stereo) indicator
5 LOC indicator
Appears when local seek tuning is on.
6 Preset number indicator
7 Signal level indicator
8 TEXT indicator
Shows when the radio text is received.
9 PTY label indicator
a Program service name
b News (
) indicator
Appears when the set news program is re-
ceived.
c TP (
) indicator
Appears when a TP station is tuned in.
d Frequency indicator
5
6
7
b c
RDS
5
7
d
Non-RDS or MW/LW
Selecting a band
1 Press BAND/ESC until the desired band (FM-1,
FM-2, FM-3 for FM or MW/LW) is displayed.
Manual tuning (step by step)
1 Push M.C. left or right.
Seeking
1 Push and hold M.C. left or right.
You can cancel seek tuning by pushing M.C. left
or right.
While pushing and holding M.C. left or right, you
can skip stations. Seek tuning starts as soon as
you release M.C.
Using PI Seek
If the tuner cannot find a suitable station, or
the reception status deteriorates, the unit
automatically searches for a different station
with the same programming. During the
search, PI seek is displayed and the sound is
muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
! The default setting for Auto PI Seek is off.
Refer to Auto PI (auto PI seek) on page 16.
Storing and recalling stations
for each band
1
Press
(list).
The preset screen is displayed.
2
Use M.C. to store the selected fre-
quency in the memory.
Turn to change the preset number. Press and
hold to store.
3
Use M.C. to select the desired station.
Turn to change the station. Press to select.
# All stations stored for FM bands can be re-
called from each independent FM band.
Section
02
7
En