Pioneer MVH-X360BT Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Car Receiver Pioneer MVH-X360BT. Pioneer MVH-X360BT 26 pages.
Also for Pioneer MVH-X360BT: Service Manual (46 pages)

Print Page

Section

Using this unit

Using Bluetooth wireless

technology

Using the Bluetooth telephone

Important

! Leaving the unit on standby to connect to

your phone via Bluetooth while the engine is

not running can drain the battery.

! Operations may vary depending on the kind

of cellular phone.

! Advanced operations that require attention

such as dialing numbers on the monitor,

using the phone book, etc., are prohibited

while driving. Be sure to park your vehicle in

a safe place and apply the parking brake be-

fore proceeding.

Setting up for hands-free phoning

1 Connection

Use the Bluetooth telephone connection

menu. Refer to Connection menu operation on

page 10.

2 Function settings

Use the Bluetooth telephone function menu.

Refer to Phone menu operation on page 11.

Basic operations

Making a phone call

1 Refer to Phone menu operation on page 11.

Answering an incoming call

1 When a call is received, press

Ending a call

1 Press

Rejecting an incoming call

1 When a call is received, press and hold

Answering a call waiting

1 When a call is received, press

Switching between callers on hold

1 Press M.C.

Canceling call waiting

1 Press and hold

Adjusting the other party's listening volume

1 Press c or d while talking on the phone.

! When private mode is on, this function is not

available.

Turning private mode on or off

1 Press BAND/

while talking on the phone.

Note

If private mode is selected on the cellular phone,

hands-free phoning may not be available.

Storing and recalling phone numbers

To store: Press and hold down one of the

preset tuning buttons (1/

The functions below can be used to store phone

numbers to the memory. For details, refer to

Phone menu operation on page 11.

! MISSED (missed call history)

! DIALED (dialed call history)

! RECEIVED (received call history)

! PHONE BOOK (phone book)

To recall: Press one of the preset tuning

buttons (1/

to 6/

Press M.C. to make a call.

Switching the display

Selecting the desired text information

You can change the display during a call.

1 Press DISP to cycle between the following:

! Call time

! Name of other party

! Number of other party

Using this unit

Using voice recognition

This feature can be used on an iPhone equipped

with voice recognition that is connected by

Bluetooth.

Press and hold M.C. to switch to voice

recognition mode.

Press M.C. and then talk into the micro-

phone to input voice commands.

To end voice recognition mode, press BAND/ .

Notes

! For details on voice recognition features,

check the manual for your iPhone.

! In order for your voice commands to be rec-

ognized and interpreted correctly, ensure

that conditions are suitable for recognition.

! Please note that wind blowing through the

vehicle windows and noise coming from out-

to 6/

side the vehicle can interfere with voice com-

mand operation.

! For optimum pick-up, the microphone should

be placed directly in front of the driver at a

suitable distance.

! Speaking too soon after the start of the com-

mand may cause voice recognition to fail.

! Speak slowly, deliberately, and clearly.

Connection menu operation

Important

Connected devices may not work properly if

more than one Bluetooth device is connected at

a time (e.g. a phone and a separate audio player

are connected simultaneously).

Press and hold

nection menu.

# You cannot perform this step during a call.

Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

Black plate (10,1)

DEVICELIST (connecting or disconnecting a de-

vice from the device list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you

want to connect/disconnect.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect/disconnect the selected

device.

If the connection is established, * is indicated

on the device name.

! When no device is selected in the device list,

this function is not available.

DEL DEVICE (deleting a device from the device

list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you

want to delete.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to display DELETE YES.

4 Press M.C. to delete the device information

from the device list.

! When no device is selected in the device list,

this function is not available.

! While this function is in use, do not turn off

the engine.

ADD DEVICE (connecting a new device)

to display the con-

<QRD3221-B>10