Pioneer SPH-10BT Firmware Update Instructions - Page 2

Browse online or download pdf Firmware Update Instructions for Car Receiver Pioneer SPH-10BT. Pioneer SPH-10BT 6 pages. Smartphone receiver
Also for Pioneer SPH-10BT: Installation Manual (33 pages), Firmware Update Instructions (4 pages), Operation Manual (35 pages), System Firmware Update Instructions (7 pages)

Print Page
Pioneer SPH-10BT Firmware Update Instructions
Procedure:
1.
Start the vehicle engine (in an open, well-ventilated area).
2.
If AV Source is On, press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF.
3.
If Pioneer Smart Sync is connected, disconnect.
4.
Press and hold Application Launch to display the "Initial" menu, then press to confirm.
5.
Press> repeatedly to select "UPDATE", then press Application Launch to confirm.
6.
Select "S/W VERS," to confirm the system info.
7.
After the "S/W VER" screen appears, check the firmware version.
8.
Verify that the firmware on your unit is not already firmware version 08.27.