Pioneer SPH-10BT System Firmware Update Instructions - Page 6
Browse online or download pdf System Firmware Update Instructions for Car Receiver Pioneer SPH-10BT. Pioneer SPH-10BT 7 pages. Smartphone receiver
Also for Pioneer SPH-10BT: Installation Manual (33 pages), Firmware Update Instructions (4 pages), Operation Manual (35 pages), Firmware Update Instructions (6 pages)
Print Page
16. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen
will return to Source OFF .
17. The firmware update is now complete. Your Pioneer SMARTPHONE Receiver is now ready for use.
Check if the firmware has been updated
Perform the same procedure for "Displaying the firmware version" to check if the firmware has been
updated.
Procedure:
1.
Start the vehicle engine (in an open, well-ventilated area).
2.
If AV Source is On, Press and hold SOURCE(MUSIC)/OFF to set the unit Source OFF.
And If Pioneer Smart Sync is connected, disconnect.
3.
Press and hold Application launch to display the "Initial" menu. then press to confirm.
4.
Press > repeatedly to select "UPDATE", then press Application launch to confirm.