Pioneer Super Tuner III D DEH-P4800MP Operation Manual - Page 21
Browse online or download pdf Operation Manual for Car Receiver Pioneer Super Tuner III D DEH-P4800MP. Pioneer Super Tuner III D DEH-P4800MP 36 pages. Owner's manual
Also for Pioneer Super Tuner III D DEH-P4800MP: Installation Manual (8 pages), Owner's Manual (34 pages)
Print Page
MAN-DEH-P4800MP-GB.fm Page 21 Thursday, September 29, 2005 11:55 AM
Multi-CD Player
50-disc multi-CD player
Only those functions described in this manual are supported by 50-disc multi-CD
players.
Introduction of advanced multi-CD player operation
Function display
Shows the function status.
RPT indicator
Shows when repeat range is
selected to current track.
* Press FUNCTION to display the
function names.
Press FUNCTION repeatedly to switch between the following functions:
RPT (repeat play) – RDM (random play) – SCAN (scan play) – ITS-P (ITS play) –
PAUSE (pause) – COMP (compression and DBE)
• To return to the playback display, press BAND.
Note
• If you do not operate the function within about 30 seconds, the display is automatically
returned to the playback display.
Repeating play
There are three repeat play ranges for the multi-CD player: MCD (multi-CD player
repeat), TRK (one-track repeat) and DSC (disc repeat).
1. Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the display.
2. Press 4 or 6 to select the repeat range.
Press 4 or 6 until the desired repeat range appears in the display.
• MCD – Repeat all discs in the multi-CD player magazine
• TRK – Repeat just the current track
• DSC – Repeat the current disc
Notes
• If you select other discs during repeat play, the repeat play range changes to MCD.
• If you perform track search or fast forward/reverse during TRK, the repeat play range
changes to DSC.
• When you select DSC for the repeating range and return to the playback display, DRPT is
displayed.
Playing tracks in random order
Random play lets you play back tracks in random order within the repeat range, MCD
and DSC.
1. Select the repeat range.
Refer to "Repeating play" on this page.
2. Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the display.
3. Press 8 to turn random play on.
RDM :ON appears in the display. Tracks will play in a random order within the
previously selected MCD or DSC ranges.
4. Press 2 to turn random play off.
RDM :OFF appears in the display. Tracks will continue to play in order.
Note
• If you turn random play on during DSC and then return to the playback display, DRDM
appears in the display.
Scanning CDs and tracks
While you are using DSC, the beginning of each track on the selected disc plays for
about 10 seconds. When you are using MCD, the beginning of the first track of each
disc is played for about 10 seconds.
1. Select the repeat range.
Refer to "Repeating play" on this page.
2. Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the display.
3. Press 8 to turn scan play on.
SCAN :ON appears in the display. The first 10 seconds of each track of the current
disc (or the first track of each disc) is played.
21