Pioneer Super Tuner IIID DEH-P5900IB Installation Manual - Page 2
Browse online or download pdf Installation Manual for Car Receiver Pioneer Super Tuner IIID DEH-P5900IB. Pioneer Super Tuner IIID DEH-P5900IB 4 pages. Pioneer cd receiver installation manual
Print Page
Connecting the Units
7
When not connecting a rear speaker lead to a
Subwoofer
Interface cable (e.g., CD-I200)
(sold separately)
iPod with Dock
Dock connector port
Connector
Gray
2 m (6 ft. 7 in.)
Dock connector
This product
Rear output
Front output
Antenna jack
Subwoofer output
Fuse (10 A)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of any
connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Perform these connections when
using the optional amplifier.
15 cm (5-
AUX jack (3.5 ø)
7/8 in.)
Use a stereo mini plug cable
to connect with auxiliary
equipment.
Connect with RCA cables
Wired remote input
(sold separately)
Hard-wired remote control
IP-BUS input
adaptor can be connected (sold
(Blue)
separately).
Multi-CD player
IP-BUS cable
(sold separately)
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
+
+
Front speaker
Front speaker
≠
≠
White
Gray
+
+
Front speaker
Front speaker
≠
≠
White/black
Gray/black
Left
Green
Violet
+
+
Rear speaker
Rear speaker
≠
≠
Green/black
Violet/black
+
+
Rear speaker
Rear speaker
≠
≠
+
+
Subwoofer
Subwoofer
≠
≠
7
optional amplifier
Power amp
iPod with Dock
(sold separately)
Connector
Power amp
(sold separately)
Dock connector
Power amp
(sold separately)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of any
connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Right
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Note:
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.
When using a Subwoofer without using the
Interface cable (e.g., CD-I200)
(sold separately)
Dock connector port
Gray
2 m (6 ft. 7 in.)
15 cm (5-
This product
AUX jack (3.5 ø)
7/8 in.)
Use a stereo mini plug cable
Subwoofer output
to connect with auxiliary
Front output
equipment.
Antenna jack
Wired remote input
Subwoofer output
Hard-wired remote control
IP-BUS input
adaptor can be connected (sold
Fuse (10 A)
(Blue)
separately).
Multi-CD player
IP-BUS cable
(sold separately)
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
+
Front speaker
≠
Left
+
Subwoofer (4 Ω)
≠
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Not used.
ENGLISH
White
Gray
+
Front speaker
≠
White/black
Gray/black
Right
Green
Violet
+
Subwoofer (4 Ω)
≠
Green/black
Violet/black
+
Green
Violet
Subwoofer
(4 Ω) × 2
Green/black
Violet/black
≠