Pioneer XW-DV535W Operating Instruction - Page 37
Browse online or download pdf Operating Instruction for Car Receiver Pioneer XW-DV535W. Pioneer XW-DV535W 47 pages. Dvd/cd receiver; speaker system; digital; wireless speaker system
Additional information
Screen sizes and disc formats
DVD-Video discs come in different screen
aspects, ranging from TV programs, which are
generally 4:3, to CinemaScope widescreen
1
movies
, with an aspect ratio of up to about 7:3.
Televisions also come in different aspect
ratios; 'standard' 4:3 and widescreen 16:9.
Set to 4:3 (Letter Box), widescreen
discs are shown with black bars top
and bottom.
Set to 4:3 (Pan&Scan), widescreen
discs are shown with the left and right
sides cropped. Although the picture
looks larger, you don't actually see
the whole picture.
TV system setting
The default setting of this system is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you find picture distortion with
some discs, set the TV system to match your
country or region's system. However, this may
restrict the kinds of disc you can watch. See
the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).
1
Switch the unit into standby, then press
SHIFT+SYSTEM SETUP .
2
Press ENTER .
The display briefly shows WELCOME and then
the new TV system setting, AUTO, NTSC or
PAL. The player then switches on.
Note
1 Many widescreen discs override the system's settings so that the disc is shown in letterbox format regardless of the setting.
2 • Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion.
• When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV
may offer various zoom and stretch options; see the instructions that came with your TV for details.
• Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a 'letterbox' style.
3 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col-
or. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has
a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at
the top and bottom of the screen.
If you need to switch the TV system setting
again, switch the player into standby and
repeat the process.
Disc
Type
DVD/Super VCD/
Video CD/DivX
2
Video
CD/MP3/WMA/
JPEG/no disc
Wireless speaker system
maintenance and precautions
Cleaning the exterior
• Use a polishing cloth or dry cloth to wipe
off dust and dirt. If the surfaces are very
dirty, wipe with a soft cloth dipped in some
neutral cleanser diluted five or six times
with water and wrung out well, then wipe
again with a dry cloth.
• Do not use furniture wax or cleaners. Never
use thinners, benzine or insecticide sprays
or other chemicals on or near this unit
since they will corrode the surface.
• If you use a chemical-impregnated
3
cleaning cloth, read the instructions
carefully before use. These cloths may
leave smear marks on half-mirror finish
surfaces; if this happens, finish with a dry
cloth.
• Make sure to unplug the unit when
cleaning.
Player setting
Format NTSC
PAL
AUTO
NTSC
NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
—
NTSC
PAL
NTSC or
PAL
09
37
En