Pioneer AVH-X7700BT System Firmware Update Instructions - Page 3
Browse online or download pdf System Firmware Update Instructions for Receiver Pioneer AVH-X7700BT. Pioneer AVH-X7700BT 6 pages. Dvd rds av receiver
Also for Pioneer AVH-X7700BT: Quick Start Manual (8 pages), System Firmware Update Instructions (6 pages)
Print Page
A. Downloading the Firmware Update Files
1. Download the firmware update files by clicking on the following link and finding your product:
pioneerelectronics.com/firmware
2. Extract the download file.
The Downloaded zip file will produce the following file when decompressed: （See the table below）
AVH-X7700BT
AVH-X6700DVD
B. Updating the Firmware on Your Unit
IMPORTANT
AVH-X7700BT
AVH-X6700DVD
DO NOT perform this firmware update if the model number of your Pioneer DVD Receiver is anything other
than one of the above models.
Ensure that the update file is located within the root (top) folder of your USB storage device. There should be
no other files within the USB storage device.
While your unit is being updated, DO NOT turn off the system's power and DO NOT touch the unit's
touchscreen as this may result in severe damage to your unit.
DO NOT remove the USB storage device during the firmware update process.
Disconnect any external mobile devices that are currently connected to your unit.
PROCEDURE
1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the
"PEH***C.AVH" file onto the USB storage device.（See the table below）
AVH-X7700BT
AVH-X6700DVD
2. Start the vehicle engine.
3. Connect the USB storage device to the USB input on your unit.
4. Press the [Home] button.
5. Touch the [AV source] & touch [Off] to source
PEH447C.AVH
PEH447C.AVH
Off.