Pioneer DCS-370 Operating Instructions Manual - Page 26
Browse online or download pdf Operating Instructions Manual for Receiver Pioneer DCS-370. Pioneer DCS-370 48 pages. Pioneer dvd receiver operating instructions
07
Audio Settings and Video Adjust menus
Chapter 7
Audio Settings and Video
Adjust menus
Audio Settings menu
The Audio Settings menu offers features for
adjusting the way discs sound.
1
Press HOME MENU and select 'Audio
Settings' from the on-screen display.
Select and change settings using //
2
/ and ENTER.
Audio Settings
Audio DRC
Audio DRC
• Settings: High, Medium, Low,
Off (default)
When watching Dolby Digital DVDs at low
volume, it's easy to lose the quieter sounds
completely — including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to on can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends on
the material you're listening to. If the material
doesn't have wide variations in volume, you
may not notice much change.
Video Adjust menu
From the Video Adjust screen you can adjust
settings that affect picture presentation.
Note
1 Audio DRC is only effective with Dolby Digital audio sources.
26
En
Audio Settings
High
Medium
Low
Off
1
1
Press HOME MENU and select 'Video
Adjust' from the on-screen display.
Video Adjust
Make settings using /// and
2
ENTER.
Video Adjust
Sharpness
Standard
Brightness
0
Contrast
0
Gamma
Off
Hue
0
Chroma Level
0
You can adjust the following settings:
• Sharpness – Adjusts the sharpness of
edges in the picture (Fine, Standard, Soft)
• Brightness – Adjusts the overall
brightness (–20 to +20)
• Contrast – Adjusts the contrast between
light and dark (–16 to +16)
• Gamma – Adjusts the 'warmth' of the
picture (High, Medium, Low, Off)
• Hue – Adjusts the red/green balance
(Green 9 to Red 9)
• Chroma Level – Adjusts how saturated
colors appear (–9 to +9)
Adjust the Brightness, Contrast, Hue and
Chroma Level settings using /.
Brightness
min
3
Press ENTER to return to the Video Adjust
screen, or HOME MENU to exit.
max
0